Axle Lower Control Arm Mount - 3" to 3.75" tube
Use these to mount your lower control arms to the axle of your rig!
Mounting width to accommodate the common 2.625” wide rod ends. This comes with 9/16” bolt holes but can be drilled out to accommodate larger bolts if desired.. These are not angled. The joining edge can be ground down slightly to fit larger diameter axle tubes if necessary.
Made from laser cut 1/4” steel and CNC bent for precise and consistent parts.
1 mount per order.
Use these to mount your lower control arms to the axle of your rig!
Mounting width to accommodate the common 2.625” wide rod ends. This comes with 9/16” bolt holes but can be drilled out to accommodate larger bolts if desired.. These are not angled. The joining edge can be ground down slightly to fit larger diameter axle tubes if necessary.
Made from laser cut 1/4” steel and CNC bent for precise and consistent parts.
1 mount per order.
Use these to mount your lower control arms to the axle of your rig!
Mounting width to accommodate the common 2.625” wide rod ends. This comes with 9/16” bolt holes but can be drilled out to accommodate larger bolts if desired.. These are not angled. The joining edge can be ground down slightly to fit larger diameter axle tubes if necessary.
Made from laser cut 1/4” steel and CNC bent for precise and consistent parts.
1 mount per order.